What to do with an estimated business energy bill

An estimated bill uses an assumed reading for part of the billing period. An estimate may be reasonable when a supplier has no reliable reading, but it can make your monthly costs hard to compare. Identify the affected register, the date of the estimate and the last verified reading before asking the supplier to review it.

Find the estimate and record its date

Read the invoice’s meter detail. Make a note of any marker the supplier uses for estimates and record whether the opening read, closing read or both are affected. A bill can contain actual readings for one supply and estimates for another. List each affected meter separately and avoid quoting the total consumption if the problem only concerns one line.

Take evidence the supplier can match

Photograph the display and serial number from a safe position, record the date and note which register each reading belongs to. If there are several displays, take enough information to identify them later. Where you cannot access the meter, ask the facilities manager or landlord for a dated record. If the meter has been exchanged, tell the supplier what you know about the date and serial numbers.

Check whether a reading was already submitted

Look for the date and confirmation number or email from the supplier. Compare the reading you sent with the cut-off used for billing. A reading provided after the invoice was produced may appear later. If a submitted reading is still missing from a subsequent invoice, give the supplier the reference and ask what prevented it being applied.

Example: a period spans a meter replacement

A warehouse receives an estimate after a meter change. The new meter’s photo shows the current reading, but it cannot by itself prove what the old meter recorded before removal. Find the installer’s exchange record with both serial numbers and readings. Ask the supplier to reconcile the period before the exchange separately from the period after it. This avoids asking it to apply a new meter’s number to old usage.

Make your request narrow and specific

Give the account, supply reference, invoice, affected register, date and evidence. Ask whether the supplier will update its reading record and whether a revised bill will be issued. Keep any acknowledgement. If the estimate concerns several months, ask for a breakdown showing which periods have changed. Where there is a charge for past use, see Ofgem’s guidance and seek advice for your own circumstances if needed.

Confirm the new baseline

When a correction arrives, check the meter and dates and compare the opening reading on the following invoice. Update your internal register so the next reviewer knows which reading was accepted. If estimates recur despite valid readings, ask the supplier to investigate how it is collecting or processing the meter data.

See the Billing Matters homepage for related guides.

Check the next expected reading

Set a date to review the next bill, especially where the supplier says a new reading has been accepted. Compare the new opening read and serial number with your evidence before treating the case as closed.

Scroll to Top